Kunci Balasan Ccna 1 Version 6.0 Chapter 6 Pt Practice Skills Assessment Exam Update 2019

Selamat tiba kembali teman semua pada kesempatan kali ini admin ingin memberitahukan informasi ihwal Kunci Jawaban Chapter 6 PT Practice Skills Assessment Exam Update 2019. Soal ini eksklusif membuka aplikasi Cisco Packet Tracer yang kalian telah download di web official Nedcad.

Alur pengerjaan test ini ialah dengan mengerjakan soal yang telah di sediakan oleh nedcad dengan mendownload sebuah file yang nanti akan ter sinkronisasi otomatis ke akun nedcad kalian. sesudah kalian membuka file tersebut akan otomatis membuka aplikasi Cisco Packet Tracer yang berisi soal menyerupai di bawah ini.

Dengan ketentuan soal menyerupai berikut ini.

Addressing Table


Objectives

• Perform basic device configuration tasks on a router and a switch.
• Configure IP addressing settings on network devices.
• Verify Layer 3 connectivity and troubleshoot connectivity issues.

Scenario

You are working on a network that has already been partially configured. In this assessment you will complete a set of requirements by configuring some additional settings on the Bldg1 switch and the router. Use the knowledge that you have gained in the curriculum and labs to fulfill the requirements below.

Makara pada dasarnya ialah kalian harus konfigurasi supaya sanggup saling berkomunikasi antar PC RA1-1 dan PC RA 2-1. Jika kalian berhasil mengkonfigurasi semua maka kabel yang berwarna merah akan berkembang menjadi warna hijau menyerupai gambar di bawah ini.



Yang akan kita konfigurasi antara lain:

• Housing Router
• Bldg1 Switch
• Bldg2 Switch
• RA1-1
• RA1-2
• RA2-1
• RA2-2

Langsung saja kita masuk pada konfigurasi:

Housing Router Configuration

Router>enable
Router#configure terminal
Router(config)#hostname Housing
Housing(config)#enable secret cisco
Housing(config)#line console 0
Housing(config-line)#password cisco
Housing(config-line)#login
Housing(config-line)#exit
Housing(config)#line vty 0 4
Housing(config-line)#password cisco
Housing(config-line)#login
Housing(config-line)#exit
Housing(config)#line aux 0
Housing(config-line)#password cisco
Housing(config-line)#login
Housing(config-line)#exit
Housing(config)#service password-encryption
Housing(config)#banner motd $Authorized Personnel Only$
Housing(config)#interface g0/0
Housing(config-if)#ip address 172.16.5.1 255.255.255.0
Housing(config-if)#no shutdown
Housing(config-if)#description Bldg1 LAN
Housing(config-if)#exit
Housing(config)#interface g0/1
Housing(config-if)#ip address 192.168.5.1 255.255.255.0
Housing(config-if)#no shutdown
Housing(config-if)#description Bldg2 LAN
Housing(config-if)#end
Housing#write
Building configuration…
[OK]

Bldg1 Switch Configuration

Switch>enable
Switch#configure terminal
Switch(config)#hostname Bldg1
Bldg1(config)#enable secret class
Bldg1(config)#line console 0
Bldg1(config-line)#password cisco
Bldg1(config-line)#login
Bldg1(config-line)#exit
Bldg1(config)#line vty 0 4
Bldg1(config-line)#password cisco
Bldg1(config-line)#login
Bldg1(config-line)#exit
Bldg1(config)#service password-encryption
Bldg1(config)#banner motd $Authorized Personnel Only$
Bldg1(config)#interface vlan 1
Bldg1(config-if)#ip address 172.16.5.2 255.255.255.0
Bldg1(config-if)#no shutdown
Bldg1(config-if)#description Bldg1 – Housing LAN
Bldg1(config-if)#exit
Bldg1(config)#ip default-gateway 172.16.5.1
Bldg1(config)#end
Bldg1#write
Building configuration…
[OK]

Bldg2 Switch Configuration

Switch>enable
Switch#configure terminal
Switch(config)#hostname Bldg2
Bldg2(config)#enable secret class
Bldg2(config)#line console 0
Bldg2(config-line)#password cisco
Bldg2(config-line)#login
Bldg2(config-line)#exit
Bldg2(config)#line vty 0 4
Bldg2(config-line)#password cisco
Bldg2(config-line)#login
Bldg2(config-line)#exit
Bldg2(config)#service password-encryption
Bldg2(config)#banner motd $Authorized Personnel Only$
Bldg2(config)#interface vlan 1
Bldg2(config-if)#ip address 192.168.5.252 255.255.255.0
Bldg2(config-if)#no shutdown
Bldg2(config-if)#description Bldg2 – Housing LAN
Bldg2(config-if)#exit
Bldg2(config)#ip default-gateway 192.168.5.1
Bldg2(config)#end
Bldg2#write
Building configuration…
[OK]

Jika Semua Router dan juga Switch nya telah kita konfigurasi langkah terakhir ialah dengan memperlihatkan konfigurasi kepada client RA1-1, RA1-2, RA2-1, dan RA2-2 menyerupai berikut ini:

RA1-1:

Ip Address : 172.16.5.20
Subnet Mask : 255.255.255.0
Default Gateway : 172.16.5.1

RA1-2:

Ip Address : 172.16.5.21
Subnet Mask : 255.255.255.0
Default Gateway : 172.16.5.1

RA2-1:

Ip Address : 192.168.5.20
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.5.1

RA2-2:

Ip Address : 192.168.5.21
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.5.1

Setelah client sudah di konfigurasi kini teman Bsi-Tips melaksanakan ping jaringan melalui client RA1-1 Ke alamat Ip Address Client RA1-2, RA2-1, dan juga RA2-2. Jika hasil dari test tersebut tidak ada yang error berarti konfigurasi telah selesai.


Demikian Kunci Jawaban CCNA 1 Version 6.0 Chapter 6 PT Practice Assessment Exam Update 2019 semoga dengan adanya Artikel ini teman sanggup terbantu. Sampai berjumpa di artikel yang lainnya ya teman .

Selamat mengerjakan GOOD LUCK.

Read More

Terbaru Kunci Balasan Ccna 1 Version 6.0 Chapter 10 Exam Update 2019

Selamat berjumpa kembali di pada kesempatan kali ini admin akan memberitahukan soal serta balasan dari test Cisco CCNA 1 Chapter 10 Version 6.0 yang kalian sanggup susukan melalui website official Cisco .

Soal ini berjumlah 23 butir soal dengan pilihan ganda dan memakai bahasa inggris. untuk mempermudah kalian dalam mengerjakan gunakan kombinasi pada keyboard kalian untuk mencari kata. tekan CTRL+F untuk mencari kata pada blog ini.

1. What are two characteristics of the application layer of the TCP/IP model? (Choose two.)

• the creation and maintenance of dialogue between source and destination applications
• the establishing of window size
• responsibility for physical addressing
• closest to the end user
• responsibility for logical addressing

Jawabannya :
- the creation and maintenance of dialogue between source and destination applications
- closest to the end user

2. What is the function of the Nslookup utility?

• to view the network settings on a host
• to display all cached DNS entries on a host
• to manually query the name servers to resolve a given host name
• to manually force a client to send a DHCP request

Jawabannya : to manually query the name servers to resolve a given host name

3. The application layer of the TCP/IP model performs the functions of what three layers of the OSI model? (Choose three.)

• network
• session
• application
• transport
• physical
• presentation
• data link

Jawabannya :
- session
- application
- presentation

4. Which layer in the TCP/IP model is used for formatting, compressing, and encrypting data?

• application
• internetwork
• session
• network access
• presentation

Jawabannya : Application

5. Which statement is true about FTP?

• The client can download data from or upload data to the server.
• FTP is a peer-to-peer application.
• The client can choose if FTP is going to establish one or two connections with the server.
• FTP does not provide reliability during data transmission.

Jawabannya : The client can download data from or upload data to the server.

6. What do the client/server and peer-to-peer network models have in common?

• Both models require the use of TCP/IP-based protocols.
• Both models support devices in server and client roles.
• Both models are used only in the wired network environment.
• Both models have dedicated servers.

Jawabannya : Both models support devices in server and client roles.

7. What part of the URL, http://www.cisco.com/index.html, represents the top-level DNS domain?

• http
• index
• www
• .com

Jawabannya : .com

8. Open the PT Activity. Perform the tasks in the activity instructions and then answer the question.
Which PC or PCs are sending FTP packets to the server?

• PC_1
• PC_2
• PC_1 and PC_3
• PC_3

Jawabannya : PC_2

9. Which application layer protocol is used to provide file-sharing and print services to Microsoft applications?

• DHCP
• SMTP
• SMB
• HTTP

Jawabannya : SMB

10. A manufacturing company subscribes to certain hosted services from its ISP. The services that are required include hosted world wide web, file transfer, and e-mail. Which protocols represent these three key applications? (Choose three.)

• HTTP
• DNS
• SMTP
• DHCP
• FTP
• SNMP

Jawabannya :
- HTTP
- SMTP
- FTP

11. Which application layer protocol uses message types such as GET, PUT, and POST?

• DNS
• SMTP
• HTTP
• POP3
• DHCP

Jawabannya : HTTP

12. Which two tasks can be performed by a local DNS server? (Choose two.)

• retrieving email messages
• providing IP addresses to local hosts
• mapping name-to-IP addresses for internal hosts
• allowing data transfer between two network devices
• forwarding name resolution requests between servers

Jawabannya :
- mapping name-to-IP addresses for internal hosts
- forwarding name resolution requests between servers

13. What is an example of network communication that uses the client-server model?

• A user prints a document by using a printer that is attached to a workstation of a coworker.
• A user uses eMule to download a file that is shared by a friend after the file location is determined.
• A workstation initiates a DNS request when the user types www.cisco.com in the address kafe of a eb browser.
• A workstation initiates an ARP to find the MAC address of a receiving host.

Jawabannya : A workstation initiates a DNS request when the user types www.cisco.com in the address kafe of a web browser.

14. Match a statement to the related network model. (Not all options are used.)

Jawabannya :


15. Which two definitions accurately describe the associated application layer protocol? (Choose two.)

• DNS - resolves Internet names to IP addresses
• FTP - transfers email messages and attachments
• HTTP - enables devices on a network to obtain IP addresses
• Telnet - provides remote access to servers and networking devices
• SMTP - transfers web pages from web servers to clients

Jawabannya :
- DNS - resolves Internet names to IP addresses
- Telnet - provides remote access to servers and networking devices

16. Two students are working on a network design project. One student is doing the drawing, while the other student is writing the proposal. The drawing is finished and the student wants to share the folder that contains the drawing so that the other student can access the file and copy it to a USB drive. Which networking model is being used?

• peer-to-peer
• master-slave
• client-based
• point-to-point

Jawabannya : peer-to-peer

17. Match the functions to the name of the application. (Not all options are used.)

Jawabannya :


18. What is an advantage for small organizations of adopting IMAP instead of POP?

• IMAP sends and retrieves email, but POP only retrieves email.
• Messages are kept in the mail servers until they are manually deleted from the email client.
• When the user connects to a POP server, copies of the messages are kept in the mail server for a short time, but IMAP keeps them for a long time.
• POP only allows the client to store messages in a centralized way, while IMAP allows distributed storage.

Jawabannya : Messages are kept in the mail servers until they are manually deleted from the email client.

19. Which protocol is used by a client to communicate securely with a web server?

• SMB
• HTTPS
• SMTP
• IMAP

Jawabannya : HTTPS

20. What message type is used by an HTTP client to request data from a web server?

• ACK
• POST
• PUT
• GET

Jawabannya : GET

21. When retrieving email messages, which protocol allows for easy, centralized storage and backup of emails that would be desirable for a small- to medium-sized business?

• IMAP
• POP
• SMTP
• HTTPS

Jawabannya : IMAP

22. What is true about the Server Message Block protocol?

• SMB messages cannot authenticate a session.
• SMB uses the FTP protocol for communication.
• Different SMB message types have a different format.
• Clients establish a long term connection to servers.

Jawabannya : Clients establish a long term connection to servers.

23. Which three statements describe a DHCP Discover message? (Choose three.)

• All hosts receive the message, but only a DHCP server replies.
• The message comes from a server offering an IP address.
• The destination IP address is 255.255.255.255.
• Only the DHCP server receives the message.
• The source MAC address is 48 ones (FF-FF-FF-FF-FF-FF).
• The message comes from a client seeking an IP address.

Jawabannya :
- The destination IP address is 255.255.255.255.
- The message comes from a client seeking an IP address.
- All hosts receive the message, but only a DHCP server replies.

Demikian soal serta balasan dari CCNA 1 Chapter 10 Exam Version 6.0 yang berjumlah 23 butir soal. Semoga artikel ini sanggup membantu teman semua dalam mengerjakan test ini. Selamat mengerjakan ! hingga jumpa di artikel berikutnya .

Baca juga soal kunci balasan CCNA 1 Chapter 11 Exam Version 6.0 update terbaru 2019.

Read More

Terbaru Kunci Tanggapan Ccna 1 Version 6.0 Chapter 9 Exam Update 2019

Selamat berjumpa kembali di pada kesempatan kali ini admin akan memberitahukan soal serta balasan dari test Cisco CCNA 1 Chapter 9 Version 6.0 yang kalian sanggup jalan masuk melalui website official Cisco .

Soal ini berjumlah 23 butir soal dengan pilihan ganda dan memakai bahasa inggris. untuk mempermudah kalian dalam mengerjakan gunakan kombinasi pada keyboard kalian untuk mencari kata. tekan CTRL+F untuk mencari kata pada blog ini.

1. What is a socket?

• the combination of a source IP address and port number or a destination IP address and port number
• the combination of the source and destination sequence numbers and port numbers
• the combination of the source and destination sequence and acknowledgment numbers
• the combination of the source and destination IP address and source and destination Ethernet address

Jawabannya : the combination of a source IP address and port number or a destination IP address and port number

2. A host device is receiving live streaming video. How does the device account for video data that is lost during transmission?

• The device will use sequence numbers to pause the video stream until the correct data arrives.
• The device will delay the streaming video until the entire video stream is received.
• The device will immediately request a retransmission of the missing data.
• The device will continue receiving the streaming video, but there may be a momentary disruption.

Jawabannya : The device will continue receiving the streaming video, but there may be a momentary disruption.

3.

Refer to the exhibit. Consider a datagram that originates on the PC and that is destined for the web server. Match the IP addresses and port numbers that are in that datagram to the description. (Not all options are used.)


Jawabannya :



4. Which flag in the TCP header is used in response to a received FIN in order to terminate connectivity between two network devices?

• ACK
• FIN
• SYN
• RST

Jawabannya : ACK

5. During a TCP session, a destination device sends an acknowledgment number to the source device. What does the acknowledgment number represent?

• the last sequence number that was sent by the source
• the total number of bytes that have been received
• one number more than the sequence number
• the next byte that the destination expects to receive

Jawabannya : the next byte that the destination expects to receive

6. Which three application layer protocols use TCP? (Choose three.)

• SNMP
• FTP
• HTTP
• TFTP
• DHCP
• SMTP

Jawabannya :
- SMTP
- FTP
- HTTP

7. Which two characteristics are associated with UDP sessions? (Choose two.)

• Transmitted data segments are tracked.
• Unacknowledged data packets are retransmitted.
• Received data is unacknowledged.
• Destination devices receive traffic with minimal delay.
• Destination devices reassemble messages and pass them to an application.

Jawabannya :
- Received data is unacknowledged.
- Destination devices receive traffic with minimal delay.

8. What happens if part of an FTP message is not delivered to the destination?

• The message is lost because FTP does not use a reliable delivery method.
• The entire FTP message is re-sent.
• The part of the FTP message that was lost is re-sent.
• The FTP source host sends a query to the destination host.

Jawabannya : The part of the FTP message that was lost is re-sent

9. Which two flags in the TCP header are used in a TCP three-way handshake to establish connectivity between two network devices? (Choose two.)

• PSH
• FIN
• ACK
• SYN
• URG
• RST

Jawabannya :
- ACK
- SYN

10. What kind of port must be requested from IANA in order to be used with a specific application?

• registered port
• private port
• source port
• dynamic port

Jawabannya : registered port

11. A PC is downloading a large file from a server. The TCP window is 1000 bytes. The server is sending the file using 100-byte segments. How many segments will the server send before it requires an acknowledgment from the PC?

• 10 segments
• 100 segments
• 1 segment
• 1000 segments

Jawabannya : 10 segments

12. What information is used by TCP to reassemble and reorder received segments?

• port numbers
• acknowledgment numbers
• fragment numbers
• sequence numbers

Jawabannya : sequence numbers

13. What is a characteristic of UDP?

• UDP only passes data to the network when the destination is ready to receive the data.
• Applications that use UDP are always considered unreliable.​
• UDP reassembles the received datagrams in the order they were received.
• UDP datagrams take the same path and arrive in the correct order at the destination.​

Jawabannya : UDP reassembles the received datagrams in the order they were received.

14. What happens if the first packet of a TFTP transfer is lost?

• The next-hop router or the default gateway will provide a reply with an error code.
• The TFTP application will retry the request if a reply is not received.
• The transport layer will retry the query if a reply is not received.
• The client will wait indefinitely for the reply.

Jawabannya : The TFTP application will retry the request if a reply is not received.

15. What type of information is included in the transport header?

• destination and source logical addresses
• encoded application data
• destination and source physical addresses
• destination and source port numbers

Jawabannya : destination and source port numbers

16. What does a client do when it has UDP datagrams to send?

• It sends to the server a segment with the SYN flag set to synchronize the conversation.
• It queries the server to see if it is ready to receive data.
• It sends a simplified three-way handshake to the server.
• It just sends the datagrams.

Jawabannya : It just sends the datagrams.

17. What is a characteristic of a TCP server process?

• An individual server can have two services assigned to the same port number within the same transport layer services.
• A host running two different applications can have both configured to use the same server port.
• There can be many ports open simultaneously on a server, one for each active server application.
• Every application process running on the server has to be configured to use a dynamic port number.

Jawabannya : There can be many ports open simultaneously on a server, one for each active server application.

18. What does TCP do if the sending source detects network congestion on the path to the destination?

• The source host will send a request for more frequent acknowledgments to the destination.
• The source will decrease the amount of data that it sends before it must receive acknowledgements from the destination.
• The source will acknowledge the last segment that is sent and include a request for a smaller window size in the message.
• The destination will request retransmission of the entire message.

Jawabannya : The source will decrease the amount of data that it sends before it must receive acknowledgements from the destination.

19. Why does HTTP use TCP as the transport layer protocol?

• because HTTP requires reliable delivery
• because transmission errors can be tolerated easily
• because HTTP is a best-effort protocol
• to ensure the fastest possible download speed

Jawabannya : because HTTP requires reliable delivery

20. Which factor determines TCP window size?

• the number of services included in the TCP segment
• the amount of data the source is capable of sending at one time
• the amount of data the destination can process at one time
• the amount of data to be transmitted

Jawabannya : the amount of data the destination can process at one time

21. When is UDP preferred to TCP?

• when all the data must be fully received before any part of it is considered useful
• when segments must arrive in a very specific sequence to be processed successfully
• when an application can tolerate some loss of data during transmission
• when a client sends a segment to a server

Jawabannya : when an application can tolerate some loss of data during transmission

22. What is the complete range of TCP and UDP well-known ports?

• 1024 - 49151
• 0 to 1023
• 0 to 255
• 256 - 1023

Jawabannya : 0 to 1023

23. A host device needs to send a large video file across the network while providing data communication to other users. Which feature will allow different communication streams to occur at the same time, without having a single data stream using all available bandwidth?

• window size
• multiplexing
• acknowledgments
• port numbers

Jawabannya : multiplexing

Demikian soal serta balasan dari CCNA 1 Chapter 9 Exam Version 6.0 yang berjumlah 23 butir soal. Semoga artikel ini sanggup membantu teman semua dalam mengerjakan test ini. Selamat mengerjakan ! hingga jumpa di artikel berikutnya .


Baca juga soal kunci balasan CCNA 1 Chapter 10 Exam Version 6.0  update terbaru 2019.

Read More

Kunci Balasan Ccna 1 Version 6.0 Chapter 8 Exam Update 2018

Selamat berjumpa kembali di pada kesempatan kali ini admin akan memberitahukan soal serta tanggapan dari test Cisco CCNA 1 Chapter 8 Version 6.0 yang kalian sanggup jalan masuk melalui website official cisco.

Soal ini berjumlah 22 butir soal dengan pilihan ganda dan memakai bahasa inggris. untuk mempermudah kalian dalam mengerjakan gunakan kombinasi pada keyboard kalian untuk mencari kata. tekan CTRL+F untuk mencari kata pada blog ini.

1. What are two reasons a network eksekutif might want to create subnets? (Choose two.)

• reduction in number of routers needed
• improves network performance
• reduction in number of switches needed
• simplifies network design
• easier to implement security policies

Jawabannya : 
- easier to implement security policies
- improves network performance

2. A network eksekutif needs to monitor network traffic to and from servers in a data center. Which features of an IP addressing scheme should be applied to these devices?

• dynamic addresses to reduce the probability of duplicate addresses
• random static addresses to improve security
• addresses from different subnets for redundancy
• predictable static IP addresses for easier identification

Jawabannya : predictable static IP addresses for easier identification

3. What is the prefix for the host address 2001:DB8:BC15:A:12AB::1/64?

• 2001:DB8:BC15
• 2001:DB8:BC15:A
• 2001:DB8:BC15:A:1
• 2001:DB8:BC15:A:12

Jawabannya : 2001:DB8:BC15:A

4. Refer to the exhibit. How many broadcast domains are there?

• 3
• 1
• 2
• 4

Jawabannya : 4

5. How many bits must be borrowed from the host portion of an address to accommodate a router with five connected networks?

• two
• five
• three
• four

Jawabannya : three

6. Refer to the exhibit. Considering the addresses already used and having to remain within the 10.16.10.0/24 network range, which subnet address could be assigned to the network containing 25 hosts?

• 10.16.10.240/27
• 10.16.10.64/27
• 10.16.10.128/28
• 10.16.10.160/26
• 10.16.10.224/26
• 10.16.10.240/28

Jawabannya :  10.16.10.64/27

7. Refer to the exhibit. A company is deploying an IPv6 addressing scheme for its network. The company design document indicates that the subnet portion of the IPv6 addresses is used for the new hierarchical network design, with the site subsection to represent multiple geographical sites of the company, the sub-site section to represent multiple campuses at each site, and the subnet section to indicate each network segment separated by routers. With such a scheme, what is the maximum number of subnets achieved per sub-site?

• 0
• 4
• 16
• 256

Jawabannya : 16

8. Match the subnetwork to a host address that would be included within the subnetwork. (Not all options are used.)

Jawabannya :

9. Refer to the exhibit. The network eksekutif has assigned the LAN of LBMISS an address range of 192.168.10.0. This address range has been subnetted using a /29 prefix. In order to accommodate a new building, the technician has decided to use the fifth subnet for configuring the new network (subnet zero is the first subnet). By company policies, the router interface is always assigned the first usable host address and the workgroup server is given the last usable host address. Which configuration should be entered into the properties of the workgroup server to allow connectivity to the Internet?

• IP address: 192.168.10.65 subnet mask: 255.255.255.240, default gateway: 192.168.10.76
• IP address: 192.168.10.38 subnet mask: 255.255.255.240, default gateway: 192.168.10.33
• IP address: 192.168.10.38 subnet mask: 255.255.255.248, default gateway: 192.168.10.33
• IP address: 192.168.10.41 subnet mask: 255.255.255.248, default gateway: 192.168.10.46
• IP address: 192.168.10.254 subnet mask: 255.255.255.0, default gateway: 192.168.10.1

Jawabannya : IP address: 192.168.10.38 subnet mask: 255.255.255.248, default gateway: 192.168.10.33

10. A company has a network address of 192.168.1.64 with a subnet mask of 255.255.255.192. The company wants to create two subnetworks that would contain 10 hosts and 18 hosts respectively. Which two networks would achieve that? (Choose two.)

• 192.168.1.96/28
• 192.168.1.128/27
• 192.168.1.16/28
• 192.168.1.192/28
• 192.168.1.64/27

Jawabannya : 
- 192.168.1.64/27
- 192.168.1.96/28

11. Refer to the exhibit. A company uses the address block of 128.107.0.0/16 for its network. What subnet mask would provide the maximum number of equal size subnets while providing enough host addresses for each subnet in the exhibit?

• 255.255.255.128
• 255.255.255.240
• 255.255.255.192
• 255.255.255.224
• 255.255.255.0

Jawabannya : 255.255.255.128

12. If a network device has a mask of /28, how many IP addresses are available for hosts on this network?

• 256
• 32
• 254
• 16
• 14
• 62

Jawabannya : 14

13. A network eksekutif is variably subnetting a network. The smallest subnet has a mask of 255.255.255.248. How many usable host addresses will this subnet provide?​

• 4
• 6
• 8
• 10
• 12

Jawabannya : 6

14. Refer to the exhibit. Given the network address of 192.168.5.0 and a subnet mask of 255.255.255.224 for all subnets, how many total host addresses are unused in the assigned subnets?

• 72
• 60
• 68
• 56
• 64

Jawabannya : 72

15. A network eksekutif wants to have the same network mask for all networks at a particular small site. The site has the following networks and number of devices:IP phones – 22 addresses
PCs – 20 addresses needed
Printers – 2 addresses needed
Scanners – 2 addresses needed

The network eksekutif has deemed that 192.168.10.0/24 is to be the network used at this site. Which single subnet mask would make the most efficient use of the available addresses to use for the four subnetworks?

• 255.255.255.0
• 255.255.255.248
• 255.255.255.240
• 255.255.255.224
• 255.255.255.192
• 255.255.255.252

Jawabannya : 255.255.255.224

16. How many host addresses are available on the network 172.16.128.0 with a subnet mask of 255.255.252.0?

• 510
• 512
• 1022
• 1024
• 2046
• 2048

Jawabannya : 1022

17. A DHCP server is used to assign IP addresses dynamically to the hosts on a network. The address pool is configured with 192.168.10.0/24. There are 3 printers on this network that need to use reserved static IP addresses from the pool. How many IP addresses in the pool are left to be assigned to other hosts?

• 251
• 254
• 252
• 253

Jawabannya : 251

18. Which subnet mask would be used if 5 host bits are available?

• 255.255.255.128
• 255.255.255.224​
• 255.255.255.0
• 255.255.255.240

Jawabannya : 255.255.255.224

19. Refer to the exhibit. Match the network with the correct IP address and prefix that will satisfy the usable host addressing requirements for each network. (Not all options are used.)

Jawabannya : 

20. Consider the following range of addresses:
2001:0DB8:BC15:00A0:0000::
2001:0DB8:BC15:00A1:0000::
2001:0DB8:BC15:00A2:0000::
...
2001:0DB8:BC15:00AF:0000::
The prefix-length for the range of addresses is   ...... /60
Jawabannya : /60

21. What is a result of connecting two or more switches together?

• The number of broadcast domains is increased.
• The number of collision domains is reduced.
• The size of the broadcast domain is increased.
• The size of the collision domain is increased.

Jawabannya : The size of the broadcast domain is increased.

22. Which two reasons generally make DHCP the preferred method of assigning IP addresses to hosts on large networks? (Choose two.)

• It eliminates most address configuration errors.
• It reduces the burden on network support staff.
• It ensures that addresses are only applied to devices that require a permanent address.
• It provides an address only to devices that are authorized to be connected to the network.
• It guarantees that every device that needs an address will get one.

Jawabannya :
- It eliminates most address configuration errors.
- It reduces the burden on network support staff.

Demikian soal serta tanggapan dari CCNA 1 Chapter 8 Exam Version 6.0 yang berjumlah 22 butir soal. Semoga artikel ini sanggup membantu teman semua dalam mengerjakan test ini. Selamat mengerjakan ! hingga jumpa di artikel berikutnya .

Read More

Kunci Balasan Ccna 1 Version 6.0 Chapter 7 Exam Update 2018

Selamat berjumpa kembali di pada kesempatan kali ini admin akan memberitahukan soal serta tanggapan dari test Cisco CCNA 1 Chapter 7 Version 6.0 yang kalian sanggup terusan melalui website official cisco.

Soal ini berjumlah 24 butir soal dengan pilihan ganda dan memakai bahasa inggris. untuk mempermudah kalian dalam mengerjakan gunakan kombinasi pada keyboard kalian untuk mencari kata. tekan CTRL+F untuk mencari kata pada blog ini.

1. Which two parts are components of an IPv4 address? (Choose two.)

• network portion
• broadcast portion
• host portion
• logical portion
• physical portion
• subnet portion

Jawabannya :
- network portion
- host portion

2. What is the purpose of ICMP messages?

• to inform routers about network topology changes
• to ensure the delivery of an IP packet
• to provide feedback of IP packet transmissions
• to monitor the process of a domain name to IP address resolution

Jawabannya :  to provide feedback of IP packet transmissions

3. Which protocol supports Stateless Address Autoconfiguration (SLAAC) for dynamic assignment of IPv6 addresses to a host?

• DHCPv6
• ICMPv6
• UDP
• ARPv6

Jawabannya : ICMPv6

4. What is the decimal equivalent of the binary number 10010101?

• 149
• 157
• 168
• 192

Jawabannya : 149

5. Which three IP addresses are private ? (Choose three.)

• 10.1.1.1
• 192.168.5.5
• 172.32.5.2
• 172.16.4.4
• 192.167.10.10
• 224.6.6.6

Jawabannya :
- 10.1.1.1
- 192.168.5.5
- 172.16.4.4

6. What is the purpose of the subnet mask in conjunction with an IP address?

• to mask the IP address to outsiders
• to uniquely identify a host on a network
• to determine the subnet to which the host belongs
• to identify whether the address is public or private

Jawabannya :  to determine the subnet to which the host belongs

7. What does the IP address 172.17.4.250/24 represent?

• network address
• multicast address
• broadcast address
• host address

Jawabannya : host address

8. A user is executing a tracert to a remote device. At what point would a router, which is in the path to the destination device, stop forwarding the packet?

• when the router receives an ICMP Time Exceeded message
• when the host responds with an ICMP Echo Reply message
• when the RTT value reaches zero
• when the value in the TTL field reaches zero
• when the values of both the Echo Request and Echo Reply messages reach zero

Jawabannya : when the value in the TTL field reaches zero

9. What is indicated by a successful ping to the ::1 IPv6 address?

• The link-local address is correctly configured.
• All hosts on the local link are available.
• The host is cabled properly.
• IP is properly installed on the host.
• The default gateway address is correctly configured.

Jawabannya : IP is properly installed on the host.

10. What type of address is automatically assigned to an interface when IPv6 is enabled on that interface?

• global unicast
• unique local
• link-local
• loopback

Jawabannya : link-local

11. Which of these addresses is the shortest abbreviation for the IP address:3FFE:1044:0000:0000:00AB:0000:0000:0057?

• 3FFE:1044::00AB::0057
• 3FFE:1044:0:0:AB::57
• 3FFE:1044::AB::57
• 3FFE:1044:0:0:00AB::0057
• 3FFE:1044:0000:0000:00AB::57
• 3FFE:1044:0000:0000:00AB::0057

Jawabannya :  3FFE:1044:0:0:AB::57

12. Match each description with an appropriate IP address. (Not all options are used.)

 Jawabannya :

13. Which two IPv4 to IPv6 transition techniques manage the interconnection of IPv6 domains? (Choose two.)

• trunking
• tunneling
• multiplexing
• dual stack
• encapsulation

Jawabannya :
- tunneling
- dual stack

14. A message is sent to all hosts on a remote network. Which type of message is it?

• directed broadcast
• unicast
• limited broadcast
• multicast

Jawabannya : directed broadcast

15. What subnet mask is represented by the slash notation /20?

• 255.255.224.0
• 255.255.240.0
• 255.255.255.0
• 255.255.255.248
• 255.255.255.192

Jawabannya : 255.255.240.0

16. What are three characteristics of multicast transmission? (Choose three.)

• Multicast messages map lower layer addresses to upper layer addresses.
• Multicast transmission can be used by routers to exchange routing information.
• A single packet can be sent to a group of hosts.
• Computers use multicast transmission to request IPv4 addresses.
• The range of 224.0.0.0 to 224.0.0.255 is reserved to reach multicast groups on a local network.
• The source address of a multicast transmission is in the range of 224.0.0.0 to 224.0.0.255.

Jawabannya :
- Multicast transmission can be used by routers to exchange routing information.
- A single packet can be sent to a group of hosts.
- The range of 224.0.0.0 to 224.0.0.255 is reserved to reach multicast groups on a local network.

17. An eksekutif wants to configure hosts to automatically assign IPv6 addresses to themselves by the use of Router Advertisement messages, but also to obtain the DNS server address from a DHCPv6 server. Which address assignment method should be configured?

• RA and EUI-64
• stateful DHCPv6
• SLAAC
• stateless DHCPv6

Jawabannya: stateless DHCPv6

18. What is the decimal equivalent of the hex number 0x3F?

• 63
• 77
• 87
• 93

Jawabannya : 63

19. What is the binary equivalent of the decimal number 232?

• 11101000
• 11000110
• 10011000
• 11110010

Jawabannya : 11101000

20. What are three parts of an IPv6 global unicast address? (Choose three.)

• a subnet ID that is used to identify networks inside of the local enterprise site
• a global routing prefix that is used to identify the network portion of the address that has been provided by an ISP
• a global routing prefix that is used to identify the portion of the network address provided by a local administrator
• an interface ID that is used to identify the local network for a particular host
• an interface ID that is used to identify the local host on the network

Jawabannya :
- a subnet ID that is used to identify networks inside of the local enterprise site
- a global routing prefix that is used to identify the network portion of the address that has been provided by an ISP
- an interface ID that is used to identify the local host on the network

21.Which two things can be determined by using the ping command? (Choose two.)

• the IP address of the router nearest the destination device
• the destination device is reachable through the network
• the number of routers between the source and destination device
• the average time it takes a packet to reach the destination and for the response to return to the source
• the average time it takes each router in the path between source and destination to respond

Jawabannya :
-The destination device is reachable through the network
-The average time it takes a packet to reach the destination and for the response to return to the source

22. How many bits are in an IPv4 address?

• 128
• 64
• 256
• 32

Jawabannya : 32

23. What are two types of IPv6 unicast addresses? (Choose two.)

• loopback
• link-local
• broadcast
• multicast
• anycast

Jawabannya :  - loopback - link-local
24. What field content is used by ICMPv6 to determine that a packet has expired?

• Time Exceeded field
• CRC field
• Hop Limit field
• TTL field

Jawabannya : Hop Limit field

Demikian soal serta tanggapan dari CCNA 1 Chapter 7 Exam Version 6.0 yang berjumlah 24 butir soal. Semoga artikel ini sanggup membantu teman semua dalam mengerjakan test ini. Selamat mengerjakan ! hingga jumpa di artikel berikutnya .

Read More

Kunci Balasan Ccna 1 Version 6.0 Chapter 6 Exam Update 2018

Selamat berjumpa kembali di pada kesempatan kali ini admin akan memberitahukan soal serta tanggapan dari test Cisco CCNA 1 Chapter 6 Version 6.0 yang kalian sanggup saluran melalui website official cisco.

Soal ini berjumlah 20 butir soal dengan pilihan ganda dan memakai bahasa inggris. untuk mempermudah kalian dalam mengerjakan gunakan kombinasi pada keyboard kalian untuk mencari kata. tekan CTRL+F untuk mencari kata pada blog ini.

1. Which three commands are used to set up secure access to a router through a connection to the console interface (Choose three.)

• line vty 0 4
• interface fastethernet 0/0
• login
• password cisco
• line console 0
• enable secret cisco

Jawabannya: login, password cisco, line console 0

2. A router boots and enters setup mode. what is the reason for this?

• The configuration file is missing from NVRAM.
• Cisco IOS is missing from flash memory
• The IOS image is corrupt.
• The POST process has detected hardware failure.

Jawabannya : The Configuration file is missing from NVRAM.

3. What type of route is indicated by the code C in an IPv4 routing table on a Cisco router?

• Default route
• Directly Connected Route
• Dynamic route that is learned through EIGRP
• Static route

Jawabannya : Directly Connected Route

4. When a connectionless protocol is in use at a lower layer of the OSI model, how is missing data detected and retransmitted if necessary?

• Connectionless acknowledgements are used to request retransmission
• Network layer IP protocols manage the communication sessions if connection-oriented transport services are not available.
• Upper-layer connection-oriented protocols keep track of the data received and can request retransmission from the upperlevel protocols on the sending host.
• The best-effort delivery process guarantees that all packets that are sent are received

Jawabannya : Upper-layer connection-oriented protocols keep track of the data received and can request retransmission from the upperlevel protocols on the sending host.

5. What are two characteristics of IP? (Choose two.)

• retransmits packets if errors occur
• does not require a dedicated end-to-end connection
• guarantees delivery of packets
• re-assembles out of order packets into the correct order at the receiver end
• operates independently of the network media

Jawabannya : does not require a dedicated end-to-end connection, operates independently of the network media

6. What are two types of router interfaces? (Choose two.)

• SVI
• LAN
• DHCP
• Telnet
• WAN

Jawabannya : WAN, LAN

7. Which characteristic describes an IPv6 enhancement over IPv4?

• Both IPv4 and IPv6 support authentication, but only IPv6 supports privacy capabilities.
• The IPv6 header is simpler than the IPv4 header is, which improves packet handling.
• IPv6 addresses are based on 128-bit flat addressing as opposed to IPv4 which is based on 32-bit hierarchical addressing.
• The IPv6 address space is four times bigger than the IPv4 address space.

Jawabannya : The IPv6 header is simpler than the IPv4 header is, which improves packet handling.

8. Refer to the exhibit. Which route from the PC1 routing table will be used to reach PC2?

A.

B.

C.

D.

Jawabannya : A

9. What is the purpose of the startup configuration file on a Cisco router?

• to contain the configuration commands that the router IOS is currently using
• to provide a limited backup version of the IOS, in case the router cannot load the full featured IOS
• to contain the commands that are used to initially configure a router on startup
• to facilitate the basic operation of the hardware components of a device

Jawabannya : to contain the commands that are used to initially configure a router on startup

10. Following default settings, what is the next step in the router boot sequence after the IOS loads from flash?

• Perform the POST routine.
• Load the bootstrap kegiatan from ROM.
• Locate and load the startup-config file from NVRAM.
• Load the running-config file from RAM.

Jawabannya : Locate and load the startup-config file from NVRAM.

11. Match the command with the device mode at which the command is entered. (Not all options are used.)

12. What is one advantage that the IPv6 simplified header offers over IPv4?

• smaller-sized header
• little requirement for processing checksums
• smaller-sized source and destination IP addresses
• efficient packet handling

Jawabannya : efficient packet handling

13. Refer to the exhibit. R1 receives a packet destined for the IP address 192.168.2.10. Out which interface will R1 forward the packet?

• FastEthernet0/0
• FastEthernet0/1
• Serial0/0/0
• Serial0/0/1

Jawabannya : Serial0/0/1

14. Open the PT Activity. The enable password on all devices is cisco.
Perform the tasks in the activity instructions and then answer the question.
For what reason is the failure occurring?

• PC1 has an incorrect default gateway configured.
• SW1 does not have a default gateway configured.
• The IP address of SW1 is configured in a wrong subnet.
• PC2 has an incorrect default gateway configured.

Jawabannya : SW1 does not have a default gateway configured.

15. Which characteristic of the network layer in the OSI model allows carrying packets for multiple types of communications among many hosts?

• the de-encapsulation of headers from lower layers
• the selection of paths for and direct packets toward the destination
• the ability to operate without regard to the data that is carried in each packet
• the ability to manage the data transport between processes running on hosts

Jawabannya : the ability to operate without regard to the data that is carried in each packet

16. Which field in the IPv4 header is used to prevent a packet from traversing a network endlessly

• Time-to-Live
• Sequence Number
• Acknowledgment Number
• Differentiated Services

Jawabannya : Time-to-Live

17. Which statement describes a hardware feature of a Cisco 1941 router that has the default hardware configuration?

• It does not have an AUX port.
• It has three FastEthernet interfaces for LAN access.
• It has two types of ports that can be used to access the console.
• It does not require a CPU because it relies on Compact Flash to run the IOS.

Jawabannya : It has two types of ports that can be used to access the console

18. Which two pieces of information are in the RAM of a Cisco router during normal operation? (Choose two.)

• Cisco IOS
• backup IOS file
• IP routing table
• basic diagnostic software
• startup configuration file

Jawabannya : Cisco IOS, IP Routing Table

19. What routing table entry has a next hop address associated with a destination network?

• directly-connected routes
• local routes
• remote routes
• C and L source routes

Jawabannya : Remote Routes

20. What IPv4 header field identifies the upper layer protocol carried in the packet?

• Protocol
• Identification
• Version
• Differentiated Services

Jawabannya : Protocol

Demikian soal serta tanggapan dari CCNA 1 Chapter 6 Exam Version 6.0 yang berjumlah 20 butir soal. Semoga artikel ini sanggup membantu teman semua dalam mengerjakan test ini. Selamat mengerjakan ! hingga jumpa di artikel berikutnya .

Read More